Sony XDR-S50

Sony XDR-S50 kézikönyv

(1)
  • Specifications
    Time display
    UK 12-hour system
    Other countries/regions 24-hour system
    Frequency range
    Band Frequency
    DAB (Band-III) 174.928 - 239.200 MHz
    DAB (Band-III) frequency table (MHz)
    No. Channel Frequency No. Channel Frequency
    15A 174.928 20 9D 208.064
    25B 176.640 21 10A 209.936
    35C 178.352 22 10B 211.648
    45D 180.064 23 10C 213.360
    56A 181.936 24 10D 215.072
    66B 183.648 25 11A 216.928
    76C 185.360 26 11B 218.640
    86D 187.072 27 11C 220.352
    97A 188.928 28 11D 222.064
    10 7B 190.640 29 12A 223.936
    11 7C 192.352 30 12B 225.648
    12 7D 194.064 31 12C 227.360
    13 8A 195.936 32 12D 229.072
    14 8B 197.648 33 13A 230.784
    15 8C 199.360 34 13B 232.496
    16 8D 201.072 35 13C 234.208
    17 9A 202.928 36 13D 235.776
    18 9B 204.640 37 13E 237.488
    19 9C 206.352 38 13F 239.200
    Speaker:
    Approx. 7.7 cm (3.0 inches) dia. 8
    Power output:
    0.3 W (at 10 % harmonic distortion)
    Output:
    i (headphone) jack (ø 3.5 mm, stereo mini jack)
    Power requirements:
    6 V DC, four LR6 (size AA) alkaline batteries
    External power source:
    DC IN 6 V
    Dimensions:
    Approx. 189 × 102.8 × 37.9 mm (w/h/d)
    (Approx. 7
    1
    2
    × 4
    1
    8
    × 1
    1
    2
    inches) incl. projecting parts and controls
    Mass:
    Approx. 486 g (1 lb 1.1
    oz
    ) incl. batteries
    Supplied accessories:
    AC power adaptor (1)
    Design and specifications are subject to change without notice.
    English
    WARNING
    To reduce the risk of fire or electric shock, do not expose this
    apparatus to rain or moisture.
    To avoid electrical shock, do not open the cabinet. Refer servicing to
    qualified personnel only.
    Do not install the appliance in a confined space, such as a bookcase or built-in
    cabinet.
    To reduce the risk of fire or electric shock, do not place objects filled with
    liquids, such as vases, on the apparatus.
    Connect the AC power adaptor to an easily accessible AC outlet. Should you
    notice an abnormality in the AC power adaptor, disconnect it from the AC outlet
    immediately.
    Features
    • DAB(Band-III) Digital Radio.
    • Easy view, 2-line character dot LCD display.
    • Simple operation for station selection.
    • Three Direct preset station buttons.
    • Sleep timer and clock display.
    • Stereo headphone jack.
    • Battery (LR6 × 4) or mains operated.
    Choosing power sources
    Installing Batteries (See fig. A)
    1 Open the battery compartment at the rear of the unit.
    2 Install four LR6 (size AA) alkaline batteries (not supplied),
    observing polarity, and then close the lid.
    Battery Life (Approx. hours) (JEITA*)
    When using DAB
    Sony alkaline LR6 (size AA) 9
    * Measured by JEITA (Japan Electronics and Information Technology Industries
    Association) standards. The actual battery life may vary depending on the
    circumstance of the unit.
    Knowing when to replace the batteries
    When the batteries become weak, the sound becomes weak and distorted.
    When the batteries are completely exhausted, “E” appears on the display and
    the power is turned off.
    When “E” appears, replace all batteries with new ones. After the batteries are
    replaced, press POWER to turn the indication off.
    Notes on replacing the batteries
    Do not take more than about 1 minutes to replace the batteries, otherwise the
    clock, any lists of receivable broadcasts for DAB scan, preset favourite services
    and all settings will be initialized. Should that happen, set the functions again.
    If the batteries are replaced while the power is on, the unit may revert to the
    factory setting.
    Notes on batteries
    Do not attempt to recharge dry batteries.
    Do not carry batteries with coins or other metallic objects. It can generate heat
    if the positive and negative terminals of the batteries are accidentally contacted
    by a metallic object.
    If you are not going to use the unit for a long time, remove the batteries to
    avoid damage from battery leakage and corrosion.
    Do not use different types of batteries at the same time.
    •When you replace the batteries, replace all with new ones.
    If the battery compartment lid comes off
    (See fig. B)
    The battery compartment lid is designed to come off when opened with excessive
    force. To put it back on, see the illustration.
    1 Insert the right hinge of the lid into the right hole of the unit.
    2 Insert the left hinge in the left hole of the unit.
    Using House Current (See fig. C)
    Connect the AC power adaptor (supplied) to the DC IN 6 V jack firmly, and plug
    it into a wall outlet.
    Notes on the AC power adaptor
    •When operating the unit with the internal batteries, remove the AC power
    adaptor from the wall outlet and the DC IN 6 V jack. Make sure that the plug of
    the external power source is disconnected before operating the unit.
    Use the supplied Sony AC power adaptor only. The polarity of the plugs of
    other manufacturers may be different. Failure to use the supplied AC power
    adaptor may cause the unit to malfunction.
    Improving the reception
    (See fig. D)
    DAB Band-III:
    Extend the telescopic aerial and adjust the length and the angle for best reception.
    Note
    Adjust the direction of the aerial by holding the bottom of it.
    The aerial can be damaged when you move the aerial with
    excessive force.
    Initial setting for the DAB
    When the batteries are installed, or when the AC power adaptor is plugged in for
    the first time after purchase (or after resetting), the unit will automatically scan
    and create a list of receivable broadcasts.
    If you wish to scan for the DAB broadcasts again, or when the unit is reset, do the
    following:
    1 Adjust the aerial accordingly.
    2 Press POWER to turn on the radio.
    3 Hold down AUTO TUNE for more than 2 seconds.
    INIT INITIALIZE OK?” appears in the display.
    4 Press PRESET/ENTER.
    No sound will be heard, and “<SCANNING>” appears in the display. DAB
    scan takes about 30 ~ 90 seconds. When finished, the unit receives the first
    service in alphabetical order stored by the DAB scan.
    INIT <SCANNING>
    Notes
    If you do not operate within 65 seconds, the initial scan mode will be cancelled.
    If no broadcasts are found by the DAB scan, “SIGNAL NOT FOUNDappears
    in the display.
    SIGNAL NOT FOUND
    •To cancel the DAB scan halfway, press AUTO TUNE. Any services received
    before you cancel are added to the list of receivable services.
    If the batteries are removed for a certain period, the received history list will be
    deleted, requiring you to scan again.
    If you set the initial setting, any DAB services registered as PRESET are
    erased.
    If you change the unit’s location of use, or want to add a new service after the
    initial setting, press and release AUTO TUNE. “FULL <SCANNING>” appears
    in the display and the unit will automatically scan and create a list of receivable
    services.
    DAB DIGITAL
    RADIO
    Operating Instructions
    Manual de instrucciones
    XDR-S50
    © 2006 Sony Corporation Printed in China
    Printed on 100% recycled
    paper using VOC (Volatile
    Organic Compound)-free
    vegetable oil based ink.
    A
    Setting the clock
    “AM 12:00” (or “0:00”) will blink in the display when the batteries are installed
    or the AC power adaptor is plugged in, and then POWER is pressed for the first
    time after purchase, or after resetting.
    1 Hold down CLOCK for more than 2 seconds to show the time set
    display.
    2 Turn U (up)/u (down) to select “OFF” and press PRESET/
    ENTER.
    The hour indication starts blinking.
    Example: 12-hour system.
    TIME SET
    AM 12:00
    3 Turn U/u to set the hour, and then press PRESET/ENTER.
    The minute indication starts blinking.
    4 Turn U/u to set the minute, then press PRESET/ENTER.
    The clock starts operating, and “:” starts blinking.
    Tips
    •To set the current time rapidly, hold U/u.
    •To set the current time exactly to the seconds, adjust the minute function in step
    4 and then press PRESET/ENTER to synchronize it with a time signal (such
    as the telephone time signal).
    •The clock system varies depending on the model purchased. For example, in
    the 24-hour system, “0:00” is indicated as midnight, and “12:00” is indicated as
    noon.
    Notes
    If you do not operate within 65 seconds while setting the clock, the clock
    setting mode will be cancelled.
    •To cancel the clock setting mode halfway, press CLOCK.
    •To show the current time as DAB is received, press DISPLAY.
    (See “Changing the display”).
    Setting the Clock Auto
    Adjustment Function
    This function enables the built-in clock of this unit to automatically synchronize
    with any DAB data being received.
    1 Hold down CLOCK for more than 2 seconds to show the time set
    display.
    2 Turn U/u to select “ON” and press PRESET/ENTER.
    AUTO TIME SET
    ON OFF
    CLOCK ADJ
    ” lights and DAB data adjusts the clock as it is received.
    Notes
    If DAB is not available (depending on area), you can disable this function.
    If this function is active while adjusting the clock manually, DAB data will
    adjust the clock the next time the unit receives it.
    Operating the radio
    The unit can receive DAB services, and features
    ALPHABETICAL, PRESET, and MANUAL modes.
    ALPHABETICAL: To select a stored service in alphabetical order.
    PRESET: To select preset services. “
    P
    ” appears in the display.
    MANUAL: To adjust the frequency incrementally.
    1 Press POWER to turn on the radio.
    When the unit is turned on again, the last band you listened to is received.
    2 Press TUNE MODE to select the desired mode.
    Each press changes the tuning mode between ALPHABETICAL and
    PRESET.
    To change to MANUAL, hold down TUNE MODE for more than 2 seconds.
    Press again to return to the previous mode.
    3 Turn U/u to tune to the desired service.
    Two short beeps sound when the lowest ensemble of DAB is received during
    tuning.
    4 Adjust the volume using VOL.
    Notes in DAB usage
    Before receiving DAB broadcasts, one or more ensembles should be stored in
    the list by the DAB scan. (See “Initial setting for the DAB”).
    If there are no services, you can choose only MANUAL mode.
    •“< NO ENSEMBLE >” appears when the ensemble for the selected service
    cannot be received.
    BETA 1
    <NO ENSEMBLE>
    If a selected service finishes broadcasting, sound stops and “< NO SERVICE >
    appears. In this case, turn U/u to select another service.
    About the SC (Secondary Component)
    If the selected primary component has a secondary component, “
    SC
    ” blinks on
    the display.
    BETA 4
    EUROPEAN EQUITIE
    Press SC to receive the desired secondary component. “
    SC
    ” appears while the
    secondary component is received.
    Turn U/u or pressing SC does the following:
    Ensemble
    Component
    Service 1
    Component
    Service 2
    Service 3
    Service 4
    Secondary Component A
    Secondary Component B
    Secondary Component
    Component
    Component
    U (up) or u (down)
    SC
    Note
    When the selected secondary component is finished, the unit returns
    automatically to the primary component.
    B
    D
    1
    2
    C
    E
    RESET button
    2-698-587-11(2)
    Presetting your favourite
    services
    There are two ways to preset services, Direct Preset and Preset Mode.
    You can preset 10 services, including 3 services stored on the Direct Preset
    buttons (PRESET 1 3).
    You can enjoy any three preset services as Direct Presets, for immediate recall by
    pressing one of the PRESET 1 3 buttons. Preset services you use often to
    Direct Preset for your convenience.
    Presetting
    services
    To preset by Direct Preset
    1 Follow steps 1 to 3 in “Operating the radio” and manually tune in
    to the service you wish to preset.
    2 Hold down one of the PRESET buttons (PRESET 1 3) for
    more than 2 seconds.
    A beep sounds and “STORED” appears for one second in the display, and the
    service is stored.
    To preset by Preset Mode
    1 Follow steps 1 to 3 in “Operating the radio” and manually tune in
    to the service you wish to preset.
    2 Hold down PRESET/ENTER for more than 2 seconds.
    The component label and the preset number appears in the display.
    3 Turn U/u to select the favourite number to preset, then press
    PRESET/ENTER.
    STORED” appears for one second in the display and the service is stored.
    Notes
    •To preset another service, repeat these steps.
    •To change the preset service, tune in to the desired service and repeat steps 2
    and 3. The new service will replace the previous service.
    Tuning in to a preset
    service
    Direct Preset
    Press one of the PRESET buttons (PRESET 1 3) on which the
    desired service is stored.
    Preset Mode
    1 Press TUNE MODE repeatedly until “
    P
    ” appears in the display.
    2 Turn U/u to select the desired preset favourite service.
    Note
    If you do not operate within 65 seconds during the above steps, the current mode
    will be cancelled.
    Deleting a preset service
    1 Follow steps in “Tuning in to a preset service” and tune in to the
    service you wish to delete.
    2 Hold down PRESET/ENTER for more than 4 seconds.
    DELETE OK?” appears in the display.
    3 Press PRESET/ENTER.
    When the preset service is deleted, the preceding preset service is received.
    Note
    To cancel deleting during the procedure, press DISPLAY. The preset service
    tuned in to in step 1 is received.
    Other useful functions
    Setting the Sleep Timer
    You can enjoy falling asleep to the radio using the built-in sleep timer that turns
    off the radio automatically after a preset duration.
    1 Press SLEEP.
    SLEEP” and the timer setting appear.
    SLEEP 60
    If you press SLEEP while the unit is turned off, the unit is turned on.
    2 Press SLEEP repeatedly to select the desired sleep timer setting.
    Each press changes the setting time as follows:
    60 45 1530 OFF
    Two short beeps sound when the display returns to “SLEEP 60”.
    After about 3 seconds, “
    SLEEP
    ” appears in the display when the duration time is
    set.
    The unit automatically turns off when the duration time is passed.
    To change the Sleep Timer setting
    Press SLEEP repeatedly to select the desired sleep timer setting even after the
    sleep timer has been activated.
    To deactivate the Sleep Timer
    Press POWER to turn off the unit before the setting time has elapsed, or press
    SLEEP repeatedly to set the sleep timer to “SLEEP OFF” in step 2.
    SLEEP
    ” disappears from the display.
    To listen with headphones (not supplied)
    Connect headphones to the i (headphone) jack. The sound through the speaker
    will not be heard.
    To illuminate the LCD
    Press LIGHT to select the backlight on or off.
    Notes
    •The first time you turn on the unit in AC operation, the backlight is set to on
    (default). Any change to this setting will be retained.
    •When DC operation, the backlight will turn off automatically if no operation is
    performed for 30 seconds.
    Changing the display
    To change the display mode
    Press DISPLAY. The selected display mode remains even if you turn the unit off
    and on again, or change the band.
    A dynamic label can be up to 128 characters long. PTY, service and ensemble
    labels can be up to 16 characters long.
    Each time you press DISPLAY, the bottom in a display changes as follows:
    BETA 1
    EUROPEAN EQUITIE
    BETA 1
    NEWS
    BETA 1
    SIGNAL LEVEL:100
    BETA 1
    BETA 1
    BETA 1
    BIT RATE:192kbps
    BETA 1
    BETA DIGITAL ONE
    BETA 1
    AM 11:55
    BETA 1
    12B 225.648MHz
    PTY label
    Service label
    Ensemble label
    Frequency
    Dynamic label
    Signal level
    BIT rate
    Clock
    If you turn U/u to change the service, the display does not change.
    Notes
    If there is no service label, no message will be displayed.
    If there is no dynamic label, “<NO DLS>” will appear.
    Stretched display
    While a component label is displayed in the fist line of the display, hold down
    DISPLAY for more than 2 seconds. The display changes to stretched display.
    BETA 1
    Each time you press DISPLAY while the first line is displayed as stretched, it
    changes as follows:
    Component label t Dynamic label t PTY label t Service label t
    Ensemble label t Frequency t Clock t BIT rate t Signal level t
    Component label
    Holding down DISPLAY for more than 2 seconds returns the display to normal.
    PTY (Programme Type)
    This function indicates services in programme type, such as NEWS, SPORTS of
    the PTY list, transmitted in the DAB.
    If the received service does not transmit the programme type, “ NO PTY Data
    appears.
    Programme type Display
    Undefined None
    News News
    Current Affairs Current Affairs
    Information Information
    Sport Sport
    Education Education
    Drama Drama
    Culture Cultures
    Science Science
    Varied Varied Speech
    Pop Music Pop Music
    Rock Music Rock Music
    Easy Listening Music Easy Listening
    Light Classical Light Classics M
    Serious Classical Serious Classics
    Other Music Other Music
    Weather Weather & Metr
    Finance Finance
    Children’s programmes Children’s Progs
    Social Affairs Social Affairs
    Religion Religion
    Phone In Phone In
    Travel Travel & Touring
    Leisure Leisure & Hobby
    Jazz Music Jazz Music
    Country Music Country Music
    National Music National Music
    Oldies Music Oldies Music
    Folk Music Folk Music
    Documentary Documentary
    Preventing Accidental
    Operation
    — HOLD Function
    This function prevents the radio from being unintentionally turned on, or the
    radio service frequency from being accidentally changed. Slide HOLD in the
    direction of the arrow. When any key is pressed, “<HOLD>” blinks for 3 seconds
    and all buttons on the radio become inoperative.
    To cancel hold, slide HOLD in the opposite direction of the arrow.
    To reset the unit (See fig. E)
    Press this button with a pointed object when the radio fails to function properly.
    The clock settings, and the services you have preset, etc., will revert to the
    factory preset.
    Precautions
    Operate the unit only on the power sources specified in “Specifications”. For
    battery operation, use four LR6 (size AA) alkaline batteries. For AC operation,
    use only the supplied AC power adaptor. Do not use any other type of AC
    power adaptor.
    •The unit is not disconnected from the AC power source (mains) as long as it is
    connected to the wall outlet, even if the unit itself has been turned off.
    Use the unit within a temperature range of 0°C to 40°C (32°F to 104°F). If it is
    used in temperatures higher than this range, numbers may appear in the display
    which have nothing to do with the frequency being received. If it is used in
    temperatures lower than this range, the numbers displayed may change very
    slowly. (These irregularities will disappear and there will be no damage to the
    unit when the unit is used in the recommended temperature range.)
    •The nameplate indicating operating voltage, etc. is located on the bottom
    exterior.
    •Avoid exposure to temperature extremes, direct sunlight, moisture, sand, dust or
    mechanical shock. Never leave in a car parked in the sun.
    Should any solid object or liquid fall into the unit, disconnect the AC power
    adaptor and remove the batteries, and have the unit checked by a qualified
    personnel before operating it any further.
    In vehicles or buildings, radio reception may be difficult or noisy. Try listening
    near a window.
    Since a strong magnet is used for the speakers, keep away personal credit cards
    using magnetic coding or spring-wound watches from the unit to prevent
    possible damage from the magnet.
    •To clean the casing, use a soft cloth dampened with a mild detergent solution.
    Disposal of Old Electrical & Electronic Equipment (Applicable in the
    European Union and other European countries with separate
    collection systems)
    This symbol on the product or on its packaging indicates that this
    product shall not be treated as household waste. Instead it shall
    be handed over to the applicable collection point for the
    recycling of electrical and electronic equipment. By ensuring this
    product is disposed of correctly, you will help prevent potential
    negative consequences for the environment and human health,
    which could otherwise be caused by inappropriate waste
    handling of this product. The recycling of materials will help to
    conserve natural resources. For more detailed information about
    recycling of this product, please contact your local Civic Office, your household
    waste disposal service or the shop where you purchased the product.
    If you have any questions or problems concerning your unit, please
    consult your nearest Sony dealer.
    Troubleshooting
    Should any problem persist after you have made the following checks, consult
    your nearest Sony dealer.
    Display is dim, or no indication is displayed.
    •The unit is being used in extremely high or low temperatures or in a place with
    excessive moisture.
    Very weak or interrupted sound, or unsatisfactory reception.
    If you are in a building, listen near a window.
    A service cannot be received when a PRESET button is pressed.
    The service has not been preset.
    Another service is preset. Preset the service again.
    The preset services may be initialized, if a maintenance service is performed.
    Please keep a copy of your settings in case you want to preset them again.
    SLEEP
    POWER
    HOLD
    TUNE MODE AUTO TUNE
    PRESET / ENTER
    SC
    1 23
    BETA 1
    EUROPEAN EQUITIE
    DSPL
    CLOCK
    LIGHT
    DC IN 6V
    POWER
    Headphone
    jack
    VOL
    PRESET 1, 2, 3
    AUTO TUNESLEEP
    SCTUNE MODE
    PRESET/ENTER
    U/u dial
    DC IN 6V
    HOLD
    LIGHT
    DISPLAY
    CLOCK
    AC power adaptor
    (supplied)
    DC IN 6V
    Aerial
    Insert the E side of the
    battery first.
    LR6 (size AA) × 4
    Halogenated flame retardants are not
    used in printed wiring boards.
    Component label
Sony XDR-S50

Kell segítség?

Kérdések száma: 0

Van kérdése a (z) Sony XDR-S50 kapcsán, vagy segítségre van szüksége? Tegye fel a kérdését itt. Adjon világos és átfogó leírást a problémáról és a kérdéséről. Minél részletesebben ábrázolja a problémát és a kérdést, annál könnyebben tudnak más Sony XDR-S50 tulajdonosok megfelelő választ adni a kérdésére.

Itt ingyenesen megtekintheti a (z) Sony XDR-S50 kézikönyvét. Ez a kézikönyv a Rádiók kategóriába tartozik, és 1 ember értékelte, átlagosan 6. Ez a kézikönyv a következő nyelveken érhető el: Angol, Spanyol. Van kérdése a (z) Sony XDR-S50 kapcsán, vagy segítségre van szüksége? Itt tedd fel kérdéseidet

Sony XDR-S50 specifikációk

Márka Sony
Modell XDR-S50
Termék Rádió
Nyelv Angol, Spanyol
Fájltípus PDF

Kapcsolódó termékek kézikönyvei

Rádió Sony

hasznalati-utasitasok.hu

Egy útmutatót keres? hasznalati-utasitasok.hu biztosítja, hogy rövid időn belül megtalálja az útmutatót.Az adatbázisunk több, mint 1 millió PDF útmutató tartalmaz, több, mint 10,000 márkától. Nap, mint nap újabb útmutatókat töltünk fel, így ön mindig megtalálhatja, amit keres.Nagyon egyszerű: csak írja be a márkanevet és a termék típusát a keresősávba és máris megtekintheti ingyenesen az ön által keresett útmutatót.

hasznalati-utasitasok.hu

© Szerzői jogok 2020 hasznalati-utasitasok.hu. Minden jog fenntartva.