Polaroid PoGo kézikönyv

Polaroid PoGo
(1)
  • Old. szám: 1
  • Fájltípus: PDF
  • PROBLEM SOLUTION
    The photo has streaks DO NOT:
    Send another image to be printed.
    DO:
    Turn off the printer. Open the paper tray
    door and remove the photo paper. Place
    one sheet of photo paper upside down (with
    the watermark facing up) in the paper tray.
    Gently glide the photo paper under the print
    head. Close the paper tray door. The sheet
    of photo paper will automatically eject.
    Open the paper tray door and reload the
    photo paper.
    The paper jammed before printing (nothing
    has been ejected)
    DO NOT:
    Send another image to be printed.
    DO:
    Open paper tray door.
    Check to see if there is paper in the tray.
    If so, ensure the paper is loaded correctly.
    If not, add a new pack of Polaroid ZINK
    Photo Paper.
    The paper jammed while printing (part of
    the image has already ejected)
    DO NOT:
    Pull out paper.
    DO:
    Turn off the printer. Open the paper tray door
    and remove media. Place one sheet of photo
    paper upside down (with the watermark
    facing up) in the paper tray. Gently glide the
    photo paper under the print head. Close the
    paper tray door. The sheet of photo paper
    will automatically eject. Open the paper tray
    door and reload the photo paper. Close the
    paper tray door.
    If all else fails... DO:
    Turn off the printer. If the printer will not
    power off, remove the battery cover and the
    battery. Replace the battery and batter cover.
    Turn on the printer.
    For additional troubleshooting and frequently asked questions,
    please visit www.polaroid.com/pogo or call 1-888-POLAROID.

    Troubleshooting

    Select the image you would like to print from the stored images
    on your camera cell phone. In the “options” menu, select “send
    via Bluetooth.” Search for devices and select the Polaroid printer
    and print.
    If you are unable to print from “send via Bluetooth,” select
    “connectivity” or “Bluetooth” under the “settings” or “tools”
    menu. Search for devices and select the Polaroid printer. Once
    paired, go back to stored images and select the image you
    want to print. In the “options” menu, select “beam” or “send via
    Bluetooth”. Select the Polaroid printer and print.
    If your camera cell phone does not include “send via Bluetooth
    under the “options” menu, select the image you want to print.
    Select the “options” menu and select “print via Bluetooth”.
    Search for devices, select the Polaroid printer, and print.
    1.
    2.
    3.

    Printing: Camera Cell Phone

    Printing: Digital Camera

    Connect your digital camera and printer to determine if a print
    option or printer icon is automatically displayed on the camera
    screen.
    If no print option appears, select “menu” and navigate to
    confirm that PictBridge is enabled. Note: if “USB” is displayed
    under “settings” then PictBridge is NOT enabled.
    Once PictBridge is enabled, select the image you want to print
    and follow the on-screen instructions to print.
    Notes:
    Do not disconnect the USB cord until entire printing process is
    complete.
    Do not turn off the printer while printing.
    Do not open paper tray door while printing.
    To print the date on your photo, ensure the Date Stamp feature on
    your digital camera is enabled.
    Does not print when connected to a PC.
    1.
    2.
    3.

    Product Diagram

    Power button USB connector Battery coverPower/Battery
    LED indicator
    Status LED
    indicator
    Photo
    exit slot
    Paper tray door
    Paper
    door latch
    AC adapter input
    LED CommunicationColor Action
    Power onSolidGreenGreenOrangeOrange
    Red
    SolidSolidPulse (1X speed)Pulse (1X speed)Pulse (1X speed)Pulse (1X speed)Pulse (3X speed)SolidSolidLow batteryOut of batteryCharging from AC adapter Fully charged from AC adapterReady to printPrintingPaper jamOut of paper, non feedReceiving informationOrangeGreenGreenGreen
    Red

    Installing and Charging the Battery

    To install the battery:
    1
    Remove battery door cover.
    2
    Install battery.
    3
    Replace battery door cover.
    To charge the battery:
    Install the battery (see above steps).
    Connect the AC adapter to the printer and the power source.
    Notes:
    Before using the printer on battery power, fully charge the battery for
    2.5 hours.
    You can print photos while plugged into the power source.
    1.
    2.

    Installing Polaroid ZINK Photo Paper™

    1
    Press and release latch on the paper tray door.
    2
    Unwrap the 10-pack of Polaroid ZINK
    Photo Paper.
    3
    Slide the 10-pack of Polaroid
    ZINK Photo
    Paper into the printer. Make sure the ZINK
    Smart Sheet™ is placed facedown. Close the
    printer tray door. The ZINK Smart Sheet will
    automatically eject.
    4
    Press and hold the POWER button to turn
    on the printer.
    Notes:
    Works only with Polaroid PoGo™ and other Polaroid ZINK products.
    The printer must be empty before refilling. Do not fill the printer with more than one 10-pack of
    Polaroid ZINK Photo Paper. Having more than 10 sheets of paper may damage the printer.
    Aviod bending the Polaroid ZINK Photo Paper.
    Only hold the Polaroid ZINK Photo Paper by its edges; avoid touching the printing surface with
    your fingers.
    To install the Paper:

    Safety Information

    Hereby, Polaroid Corporation declares that this Instant Mobile Printer is in compliance with the essential
    requirements and other relevant provisions of Directive 1999/5/EC.
    FCC WARNING
    Changes or modifications not expressly approved by the party responsible for compliance could void the
    user’s authority to operate the equipment.
    NOTICE
    This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
    to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
    interference in a residential installation.
    This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in
    accordance with the instructions, may cause harmful interference to radio communications. However, there
    is no guarantee that interference will not occur in a particular installation. If this equipment does not cause
    harmful interference to radio or television reception, which can be determined by turning the equipment off
    and on, the user is encouraged to try to correct the interference by one or more of the following measures:
    - Reorient or relocate the receiving antenna
    - Increase the separation between the equipment and receiver
    - Connect the equipment into an outlet or on a circuit different from that to which the receiver
    is connected
    - Consult the dealer or an experienced radio/TV technician for help.
    This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
    This equipment complies with the FCC/IC radiation exposure limits sent forth for uncontrolled equipment and
    meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET62 and RSS-102 for the IC
    radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that is deemed to comply
    without maximum permissive exposure evaluation (MPE). But it is desirable that is should be installed and
    operated with at least 20cm and more between the radiator and person’s body (excluding extremities: hands,
    wrists, feet, and ankles).
    This device complies with Part 15 of the FCC Rules and the RSS-Gen of IC Rules. Operation is subject to
    the following two conditions: (1) this device may not cause interference, and (2) this device must accept any
    interference, including interference that may cause undesired operation of this device.
    CAUTION
    RISK OF EXPLODING IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
    BATTERY CAUTIONS
    Use only the provided charger with this product.
    Only charge the battery as recommended by the instructions.
    The battery provided with his product is intended for this product only.
    Prolonged use of the printer will result in the battery becoming warm.
    BATTERY WARNINGS
    Avoid contact with leaking or a damaged battery.
    Do not short battery terminals.
    Adult supervision is recommended when product is used by young children.
    Avoid areas of excessive heat or moisture.
    Do not disassemble the battery.
    1.
    2.
    3.
    4.
    1.
    2.
    3.
    4.
    5.
    This product contains electrical or electronic materials. The presence of these materials
    may, if not disposed of properly, have potential adverse effects on the environment and
    human health. Presence of this label on the product means it should not be disposed of
    as unsorted waste and must be collected separately. As a consumer, you are responsible
    for ensuring that this product is disposed of properly. To find out how to properly
    dispose of this product, please go to www.polaroid.com and click on “Company“ or
    call the customer service number for your country listed in the instruction manual.
    Passcode: 6-0-0-0
    For specific printing directions for your phone, visit www.polaroid.com/pogo.
    The following is an example for connecting to the printer and print your images.
    The terminology used in your cell phone may be different.
    For specific print directions for your digital camera, please review your digital
    camera user’s manual or manufacturer’s website.
    For additional troubleshooting for your camera, visit www.polaroid.com/pogo.
    The following is an example for connecting to the printer and print your images.
    The terminology used in your camera may be different.
Polaroid PoGo

Kell segítség?

Kérdések száma: 0

Van kérdése a (z) Polaroid PoGo kapcsán, vagy segítségre van szüksége? Tegye fel a kérdését itt. Adjon világos és átfogó leírást a problémáról és a kérdéséről. Minél részletesebben ábrázolja a problémát és a kérdést, annál könnyebben tudnak más Polaroid PoGo tulajdonosok megfelelő választ adni a kérdésére.

Itt ingyenesen megtekintheti a (z) Polaroid PoGo kézikönyvét. Ez a kézikönyv a Nyomtatók kategóriába tartozik, és 1 ember értékelte, átlagosan 7.5. Ez a kézikönyv a következő nyelveken érhető el: Angol. Van kérdése a (z) Polaroid PoGo kapcsán, vagy segítségre van szüksége? Itt tedd fel kérdéseidet

Polaroid PoGo specifikációk

Általános
Márka Polaroid
Modell PoGo
Termék Nyomtató
EAN 826219012845
Nyelv Angol
Fájltípus PDF