Miele WDD030 EcoPlus&Comfort használati utasítás

Miele WDD030 EcoPlus&Comfort
(1)
  • Old. szám: 2
  • Fájltípus: PDF
WDD 030 en - AU, NZ M.-Nr. 10 832 570/00

Before the first use

Operating the washing machine

OPERATING THE WASHING MACHINE

Washing

WASHING

Changing the programme sequence

CHANGING THE PROGRAMME SEQUENCE

Programme chart

Programme
Load
(inkg) Temperature Items Extras
Cottons
8.0 60°C⁄40°C Normally soiled cotton garments
, , , 
Cottons 8.0 Cold to 90°C Cottons, linens or cotton mix fabrics, e.g. table linen, towelling,
underwear, T-shirts etc.
, , , 
Minimum iron 3.5 Cold to 60°C Synthetic, mixed fibre and easy care cotton
, , , 
Delicates 2.0 Cold to 40°C Delicate garments made from synthetic fibre, mixed fibre, rayon
and viscose
, , , 
Woollens
2.0 Cold to 40°C Machine-washable or hand-washable wool or wool blend fabric
Shirts Cold to 60°C Shirts and blouses made of cotton and mixed fibre
, , , 
Express 20 3.5 Cold to 40°C Cotton garments that have hardly been worn or are only very
lightly soiled
Dark garments/
Denim
3.0 Cold to 60°C Black and dark garments made from cotton, mixed fibres and
denim
, , , 
Outerwear 2.5 Cold to 40°C Performance outerwear (e.g. jackets and trousers) made from
membrane fabric such as Gore-Tex®, SYMPATEX®, WIND-
STOPPER® etc.
, , , 
Proofing 2.5 40°C Treating microfibre fabric, skiwear and table linen made from
mainly synthetic fibres
Drain/Spin 8.0
Drain only: Select for the spin speed.
Separate rinse/
Starch
8.0 For rinsing hand-washed items
Starching table cloths, serviettes and workwear
= Short; = Water plus; = Pre-wash; = Soak
3
1
2
4
ɉBefore using the machine for the first
time, ensure that it is correctly installed
and connected. Please read the separate
operating instructions supplied with the
appliance.
For safety reasons, spinning is not possible
until the machine has been prepared for use
for the first time. To activate the spinning
function, you must run a wash programme
without laundry and without detergent.
Using detergent could result in an exces-
sive build-up of foam.
This also activates the ball valve. The ball
valve prevents detergent escaping from the
suds container into the sump during a wash
programme, thus making maximum use of
the detergent.
Running the first programme
ĺ Turn on the tap.
ĺ Turn the programme selector to Cottons.
The washing machine is now switched on
and in the control panel, the temperature
60°C lights up.
ĺ Touch the Start/Stop sensor.
The programme will start and the symbol
lights up in the control panel.
After the end of the programme
The symbol lights up in the control panel;
: appears in the time display and the
drum occasionally rotates.
ĺ Touch the Start/Stop sensor.
The door will be unlocked.
ĺ Reach under the door grip and pull the
door open.
ĺ When the programme has ended, turn
the programme selector to .
Note: For safety reasons close the door.

Washing environmentally and economically

To make the most out of your machine,
load the maximum dry load for the pro-
gramme you are using.
When smaller amounts of laundry are
washed, the automatic load recognition
system will reduce the amount of water
and energy used.
Use the Express 20 programme for
small, lightly soiled loads.
Modern detergents enable washing at
reduced temperatures (e.g. 20°C). Use
appropriate temperature settings for
saving energy.
Reduce the amount of detergent with
smaller loads (approx. ⅓ less than the
amount recommended can be used
when washing a half load).
Selecting the highest possible spin
speed for the wash programme will
save energy when drying in a tumble
dryer afterwards.

1. Preparing the laundry

ĺ Empty all pockets.
ɉForeign objects (e.g. nails,
coins, paper clips, etc.) can
cause damage to garments and
components in the machine.
ĺ Sort the laundry by colour and by care label. Most gar-
ments have a textile care label in the collar or side seam.
ĺ Pre-treat stains and badly soiled areas (see the booklet
"Miele's guide to laundry care").

2. Loading the washing machine

Opening the door
ĺ Reach under the door grip and
pull the door open.
ĺ Unfold the laundry and load
loosely in the drum.
Closing the door
ĺ Make sure that no items are
caught between the door and
the seal.
ĺ Shut the door with a gentle
swing.
1 Detergent dispenser drawer
2 Control panel
3 Access to drain filter, drain pump
and emergency release
4 Door

3. Selecting a programme

The washing machine is switched on by turning the pro-
gramme selector to a wash programme.
Programme selection
ĺ Turn the programme selector
to the required programme.
The likely wash time is shown in the time display and the
pre-set temperature and spin speed light up in the con-
trol panel.
Selecting a temperature/spin speed
The wash programme's pre-set temperature and spin
speed light up brightly. The choice of temperatures and
spin speeds selectable for the wash programme light up
dimly.
ĺ Touch the sensor for the tem-
perature you want. It then
lights up brightly.
ĺ Touch the sensor for the spin
speed you want. It then lights
up brightly.
Selecting Extra options
The selection of Extras available for the wash programme
lights up dimly.
ĺ Touch the sensor for the Extra
you want. It then lights up
brightly.
Useful tip: You can select multiple Extras for a wash
programme.

4. Adding detergent

There are several options for adding deter-
gent.
Detergent dispenser drawer
ĺ Pull out the
detergent drawer
and add
detergent to the
compartments.
Detergent for the pre-wash
Detergent for the main wash,
including Soak if selected
/
Fabric softener, liquid starch or
capsules
CapDosing
Three different types of capsules are avail-
able:
Fabric care (e.g. fabric conditioner)
Additives (e.g. detergent enhancers)
Detergent
See "Detergent" in the operating instruc-
tions for more information.

5. Starting the programme

ĺ Touch the flashing Start/Stop sensor.
The door will lock (the symbol will appear
in the control panel) and the programme will
start.

6. At the end of the programme

The time display shows :. The sym-
bol will remain lit up in the control panel.
The door is locked in the anti-crease phase.
ĺ Touch the Start/Stop sensor.
ĺ The door unlocks and the symbol in
the control panel goes out.
ĺ Pull open the door.
ĺ Remove the laundry.
ɉCheck that all items have been
removed from the drum.
ĺ Check the folds
in the door seal
for any small
articles, e.g.
buttons, which
might be lodged
there.
ĺ Turn the programme selector to the
position. This switches the washing
machine off.
ĺ If applicable, remove the used capsule
from the detergent dispenser drawer.
ĺ Close the door. Otherwise there is a dan-
ger of objects being placed inadvertently
in the drum. If these remain unnoticed
and were washed in the next load, they
could damage the laundry. An open door
is also a danger to pets and children.
1 Control panel
2 Sensor controls - temperature
for selecting the temperature
3 Sensor controls - spin speed
for selecting the spin speed
4 Sensor controls - Extras
various options can be added to the
wash programmes
5 Indicator lights 
 = Fault with the water inlet or
drainage
= Excess detergent was used
= Hygiene information
= Flashing: Laundry can be added
Lit up constantly: Door of the
washing machine is locked
6 CapDosing sensors
 = Fabric care (e.g. fabric conditioner)
 = Additives (e.g. detergent
enhancers)
 = Detergent (for the main wash only)
7 Time display
After the programme has started, the
programme duration will appear in the
display in hours and minutes.
8 Sensor controls   
for the Delay start function
9 Start/Stop sensor
Touching the Start/Stop sensor starts the
selected programme or cancels a pro-
gramme that has already been started.
The sensor flashes slowly as soon as it is
possible for a programme to be started
and then lights up constantly after the
programme has started.
10 Optical interface
for service technicians
11 Programme selector
for selecting programmes and for switch-
ing off. The washing machine is switched
on by selecting a programme, and
switched off by turning the programme
selector to the position.

Changing a programme

After the successful start of a programme
it is no longer possible to select a different
programme.
If you would like to change the programme
or add/remove laundry, you have to cancel
the programme.

Cancelling a programme

You can cancel a programme at any time
after it has started.
ĺ Touch the Start/Stop sensor.
The water is pumped away and the time
display changes to :. As soon as the
symbol in the control panel goes out, the
programme has been cancelled and the
door can be opened.
Selecting a different programme after
cancelling the programme
ĺ Open the door.
ĺ Close the door.
ĺ Check that there is still detergent in the
dispenser drawer. Add more detergent if
necessary.
ĺ Turn the programme selector to the pro-
gramme you want and start it by touching
the Start/Stop sensor.
Removing laundry after cancelling the
programme
If you want to remove the laundry when it is
dripping wet:
ĺ Open the door.
ĺ Remove the laundry.
If you want to remove the laundry
after it has been spun (damp):
ĺ Open the door.
ĺ Close the door.
ĺ Turn the programme selector to Drain/
Spin.
Useful tip: Select an appropriate spin
speed.
ĺ Touch the Start/Stop sensor.
The laundry is spun and can be removed
damp after spinning.

Interrupting a programme

ĺ Turn the programme selector to the
position.
The washing machine switches off.
ĺ To continue: Turn the programme selector
to the position of the wash programme
that was started.
Useful tip: If  appears in the time dis-
play, the programme selector is in the incor-
rect position.

Adding or removing laundry

You can add or remove laundry at the start
of a wash programme as long as the
symbol is flashing in the control panel.
ĺ Briefly touch the Start/Stop sensor.
The programme will stop and the door will
unlock.
ĺ Pull open the door.
ĺ Add or remove items.
ĺ Close the door.
ĺ Touch the Start/Stop sensor.
The wash programme will continue.
Miele WDD030 EcoPlus&Comfort

Kell segítség?

Kérdések száma: 0

Van kérdése a (z) Miele WDD030 EcoPlus&Comfort kapcsán, vagy segítségre van szüksége? Tegye fel a kérdését itt. Adjon világos és átfogó leírást a problémáról és a kérdéséről. Minél részletesebben ábrázolja a problémát és a kérdést, annál könnyebben tudnak más Miele WDD030 EcoPlus&Comfort tulajdonosok megfelelő választ adni a kérdésére.

Itt ingyenesen megtekintheti a (z) Miele WDD030 EcoPlus&Comfort használati utasítását. Ez a használati útmutató a Mosógépek kategóriába tartozik, és 1 ember értékelte, átlagosan 7.5. Ez a kézikönyv a következő nyelveken érhető el: Angol. Van kérdése a (z) Miele WDD030 EcoPlus&Comfort kapcsán, vagy segítségre van szüksége? Itt tedd fel kérdéseidet

Miele WDD030 EcoPlus&Comfort specifikációk

Általános
Márka Miele
Modell WDD030 EcoPlus&Comfort
Termék Mosógép
EAN 4002515758540
Nyelv Angol
Fájltípus PDF
Tápellátás
Energiahatékonysági osztály (régi) A+++
Mosási energiafelhasználás 0.9 kWh
Ciklusonkénti vízfogyasztás 49 L
AC bemeneti feszültség 220 - 240 V
AC bemeneti frekvencia 50 Hz
Áram 10 A
Csatlakoztatott terhelés 2400 W
További jellemzők
Mosás éves energiafogyasztása 177 kWh
Éves vízfogyasztás mosás 10120 L
Teljesítmény
Dobkapacitás 8 kg
Legnagyobb centrifugálási sebesség 1400 RPM
Centrifuga hatékonyság osztály B
Zajszint (centrifugálás) 74 dB
Zajszint (mosás) 50 dB
Késleltetett indítás Igen
Indításkésleltetés (max.) 24 ó
Terheléskiegyenlítő rendszer Nincs
Mosási programok mennyisége -
Ciklusidő (max.) 179 perc
Időzítő Igen
Állítható forgási sebesség Igen
Visszamaradó nedvességtartalom 53 %
Ergonómia
Készülék elhelyezése Szabadonálló
Hátralévő idő jelzése Igen
Kialakítás
Feltöltési idő Elől betöltős
Termék színe Fehér
Beépített kijelző Igen
Kijelző típusa LED
Kijelző világítása Igen
Világítás színe Sárga
Ajtópánt Jobb
Dob anyaga Rozsdamentes acél
Vezetékhossz 2 M
Vezérlés típusa Rotary,Touch
Dob mérete 59 L
Mosási programok
Gyapotmosási program Igen
Finommosás/Selyem mosási program Igen
Blúz/ing mosási program Igen
Kézi/Gyapjú mosási program Igen
Gyorsmosási program Igen
Fekete mosási program Igen
Farmer mosási program Igen
Intenzív/szabadtéri mosási program Igen
Előmosási program Igen
Tömeg és méretek
Szélesség 596 mm
Mélység 636 mm
Magasság 850 mm
Tömeg 90000 g
Mélység nyitott ajtóval 1054 mm
mutass többet

Gyakran ismételt kérdések

Az alábbiakban megtalálod a leggyakrabban feltett kérdéseket Miele WDD030 EcoPlus&Comfort .

Nem szerepel a kérdésed? Itt tedd fel kérdéseidet