GoPro HD HERO kézikönyv

GoPro HD HERO
(1)
  • Old. szám: 4
  • Fájltípus: PDF
  • 1 - Status LCD Screen 6 - USB Port
    2 - Power/Mode Button 7 - Combo TV/Audio Out
    3 - LED Light 8 - Battery Door
    4 - HDTV Out Port 9 - Shutter/Select Button
    5 - Hero BUS
    Port 10 - SD Card Slot

    BASICS OF USING YOUR CAMERA

    Free downloadable camera updates may be available at gopro.com.
    Be sure to insert an SD card into the camera or else you won’t be able to record photos or video.

    POWER/MODE BUTTON ! Front of Camera

    POWER/MODE button turns camera on and o and works as a mode switching button once camera is on.

    SHUTTER BUTTON ! Top of Camera

    Shutter button starts and stops video recording and photo capture. When in the SET menu of options the
    shutter button acts as a toggle button for changing settings. See the SETTINGS MENU section of these
    instructions for more information.
    Turn Camera On
    Quickly press the POWER/MODE button and camera will turn on.
    Camera will beep 3 times, indicating the camera is powering on.
    Turn Camera O
    Press and hold the POWER/MODE button for 2 seconds.
    Camera will beep 7 times, indicating the camera is shutting o .
    Changing Modes
    Once camera is on, quickly pressing the POWER/MODE button will change
    modes from video mode to self-timer, to photo mode, etc.
    The battery ships partially charged. For best initial performance, charge battery before fi rst use.
    However, NO damage will occur to battery if used prior to charging. See charging section.

    STATUS LCD ICONS

    TO SHOOT VIDEO

    Turn on camera by pressing POWER/MODE button.
    The camera will power on in VIDEO mode as the default mode.
    Default resolution is 960p (1280x960). See Settings Menu section to learn about resolutions.
    Press shutter button to begin recording video. Camera will beep once.
    Red LED light on front of the camera will blink while video is recording.
    Press shutter button to stop recording or camera will automatically stop recording when
    your SD card is full or your battery dies (approx 2.25 hours of battery life on a full charge).
    Camera will beep 3 times when recording stops and fi le is saved.

    USING 10 SECOND TIMER

    Press the POWER/MODE button until you see the 10 SECOND TIMER icon.
    Press the SHUTTER button and the camera will automatically shoot a photo in 10 seconds.
    As series of beeps and fl ashing red LED light will indicate when the photo has been taken.

    TO SHOOT PHOTOS EVERY “X” SECONDS TIME LAPSE MODE

    BLINKING
    Press POWER/MODE button until you see the blinking camera icon.
    The default timing is to shoot a PHOTO EVERY “2” SECONDS, automatically.
    Press the SHUTTER button to start taking photos. Press the SHUTTER button again to stop.
    To change the timing to shoot a photo every 2, 5, 10, 30, or 60 seconds, see the SETTINGS
    MENU section of these instruction.

    TO SHOOT SINGLE SHOT PHOTOS

    Press the POWER/MODE button repeatedly until you see the solid, non blinking camera icon.
    Press SHUTTER button to take a photo.
    A beep will sound and red LED will fl ash to indicate a photo has been taken.

    TO SHOOT TRIPLE SHOT SEQUENCE PHOTOS

    Press POWER/MODE button until you see the triple shot icon on the front LCD
    status screen.
    Press the shutter button to shoot 3x photo-sequence in 2 seconds.

    SETTINGS MENU / ADVANCED FEATURES

    ENTERING THE SETTINGS MENU

    Press the POWER/MODE button repeatedly until you see the icon.
    Press the SHUTTER button to enter settings menu.
    Press the POWER/MODE button to cycle through options once in settings menu.

    CHOOSING ONE BUTTON MODE ON / OFF

    “One Button Mode On” forces the camera to automatically begin recording video or photos once the camera
    is turned on, depending on which default power up mode the camera is set to (see next instructions).
    In “One Button Mode On” the camera is either “on and recording”, or powered o . This simplifi es camera
    operation when loaning the camera to friends or when you know you only want to shoot in one mode.
    The shutter button is disabled in “One Button Mode” and will not start or stop the recording while the
    camera is on. “One Button Mode” is convenient when you only want to shoot one type of video or photos
    and prefer to simplify operation of the camera to be either “on and recording” or o with only the power
    button being used to operate the camera. This is a great “Simple Mode” for loaning the camera to friends.
    Symbol on LCD Screen Function
    (default setting)
    One Button Mode O .
    One Button Mode On.
    To turn “One Button Mode” ‘ON’:
    1. Press the SHUTTER button to toggle between SET MENU choices and stop when onO
    (One Button Mode On) is showing on the screen.
    2. Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
    next feature option.
    3. Turn your camera o and then on again and the camera will begin recording in whatever
    the default power on setting and resolution is set to.
    4. Press and hold the power button for 3 seconds to stop recording and turn the camera o .
    To turn “One Button Mode” ‘OFF’:
    1. Turn the camera on.
    2. While the camera is on (and recording), press and hold the shutter button for 3 seconds. Let go.
    3. The camera’s SET menu will appear.
    4. Press the shutter button to enter the SET menu.
    5. When onO (One Button Mode On) appears, press the shutter button to toggle the setting
    to onF (One Button Mode O ).
    6. Turn the camera o .
    7. When you turn the camera on again the One Button Mode feature will be turned o .

    CHOOSING DEFAULT MODE AT POWER UP

    You can program your camera to turn on in either Video mode, Photo mode, Triple Shot Sequence mode,
    or Photo Every “X” Seconds mode:
    Symbol on LCD Screen Function
    (default setting)
    Video Mode (F means “Filming”)
    Single Shot Photo Mode
    Triple Shot Photo Mode
    Photo Every “X” Seconds Mode
    1. Press the SHUTTER button to toggle between choices.
    2. Press the POWER/MODE button to save whichever setting is showing on the screen
    and continue to the next feature option.

    CHOOSING VIDEO RESOLUTION

    Your HD HERO camera shoots the following video resolutions:
    Symbol on
    LCD Screen
    Description Resolution
    Frames
    per
    Second
    Suggested Use
    16:9 Wide Angle
    Standard
    Defi nitionVideo
    WVGA
    (848x480)
    60 NTSC
    50 PAL
    When smaller fi le size and
    highest frame rate is desired.
    16:9 HD Video
    720p
    (1280 x 720)
    30 NTSC
    25 PAL
    When mounting on vehicles or
    gear, when a very wide angle
    is desired but vertical viewing
    area is not as important.
    16:9 Widest
    HD Video
    720p
    (1280 x 960)
    60 NTSC
    50 PAL
    Same as r2 but with ultra slow
    motion playback.
    (default
    resolution)
    4:3 Tallest HD Video
    Max Overall View
    960p
    (1280 x 960)
    30 NTSC
    25 PAL
    When mounting on body.
    helmet, surfboard or chest
    harness, this mode o ers the
    most vertical viewing area of
    all resolutions.
    16:9 Full HD
    Highest Resolution
    1080p
    (1920 x 1080)
    30 NTSC
    25 PAL
    When vehicle or gear
    mounted, best choice for
    highest in-car fi lming. 25%
    narrower fi eld of view (127º)
    compared to 170º view of
    other resolutions.
    NOTE: Above r1, r2, r3, r4 and r5 settings in the SET menu appear as 1, 2, 3, 4 and 5 (no “r”) on the
    bottom le" corner of LCD screen when not in the SET menu. See previous “STATUS LCD ICONS”
    drawing for an example of this.
    1. Press the SHUTTER button to toggle between choices.
    2. Press the POWER/MODE button to save whichever setting is showing on the screen
    and continue to the next feature option.

    CHOOSING EXPOSURE SETTING

    Choose between Spot Meter and Center Weighted Average Meter exposure settings depending on the lighting
    of your environment:
    Symbol on LCD Screen Function
    (default setting)
    Center weighted average meter is best for normal outdoor and
    indoor lighting conditions.
    This icon appears on LCD when
    spot meter is active.
    Spot meter is primarily for shooting from inside of a car or other dark
    space looking out into a brighter outside setting. Spot meter adjusts
    the exposure for the absolute center of the scene, for example the road
    ahead instead of the interior of the car.
    If you are wanting optimum exposure of the inside of the car, fi lming
    mainly the driver for example, choose Cnt center weighted average
    to expose for the inside of the car.
    1. Press the SHUTTER button to toggle between choices.
    2. Press the POWER/MODE button to save whichever setting is showing on the screen
    and continue to the next feature option.

    UPSIDE DOWN IMAGE CAPTURE

    If you need to mount your camera upside down to get the perfect photo or video angle, you can program
    the camera to save the photo or video upside down so that it appears right side up when you review
    it on your computer or TV. This eliminates the need to “fl ip” the photo or video later on your computer.
    Symbol on LCD
    Screen
    Function
    (default setting)
    Saves photos and videos in a normal “right side up” orientation.
    Saves photos and videos upside down so that they appear right side up when
    you review on your computer or TV. The video camera and photo icons will
    blink quickly on the LCD screen to reminding you that you are saving photos
    and videos in upside down mode.
    1. Press the SHUTTER button to toggle between the UP / UPd choices.
    2. Press the POWER/MODE button to save whichever setting is showing on the screen
    and continue to the next feature option.

    SETTING VIDEO LIVE FEED ON / OFF

    You can set your camera to send a live video signal out the side TV or HDTV ports by toggling the VIDEO
    LIVE FEED setting on and o . Video Live Feed via the USB port is not supported. When Video Live Feed
    is set to OFF (LFF) the camera will switch into video / photo playback mode when one of the included TV
    cables are plugged into the camera. If Video Live Feed is turned on (LFO), the camera will stay in normal
    camera mode when plugged into a TV and will send a live video signal to the TV. Plugging in the component
    cable will send an HD video signal out from the camera, and plugging in the composite cable will send a
    standard defi nition signal out from the camera. Video Live Feed On allows for plugging the camera into
    wireless transmitters and TVs for live viewing from the camera. NOTE: If the component cable is used to
    send live HD video out from the camera, and you begin simultaneously recording HD video to the SD card,
    the live video feed will be reduced to standard defi nition as the camera cannot record and transmit HD video
    at the same time. If you wish to have an HD live video feed from the camera you cannot begin recording HD
    video to the SD card. If the composite cable is used to send standard defi nition video out from the camera,
    then the camera can simultaneously record HD video to the SD card.
    Symbol on LCD Screen Function
    (default setting)
    Video Live Feed OFF.
    Video Live Feed ON.
    1. Press the SHUTTER button to toggle between the LFF / LFO choices.
    2. Press the POWER/MODE button to save whichever setting is showing on the screen
    and continue to the next feature option.

    CHOOSING ON SCREEN DISPLAY ON / OFF

    When the camera sends a live feed video signal out to a wireless transmitter or TV, it will send a battery
    meter icon and a recording on/o icon via an “On Screen Display” that will appear in the video feed.
    If you prefer to turn these status icons o , you can do so by toggling the “On Screen Display” setting o .
    Symbol on LCD Screen Function
    (default setting)
    On Screen Display ON
    On Screen Display OFF
    1. Press the SHUTTER button to toggle between the oSO / oSF choices.
    2. Press the POWER/MODE button to save whichever setting is showing on the screen
    and continue to the next feature option.

    CHOOSING PHOTO EVERY 2, 5, 10, 30, 60 SECONDS TIMING

    You can shoot a photo every 2, 5, 10, 30, or 60 seconds, ongoing, with the “Photo every X seconds” mode.
    When you see P2 (photo every 2 seconds is the default setting), you can press the SHUTTER button to
    toggle the following options:
    Symbol on LCD Screen Function
    / / / /
    Shoots photos in 2 / 5 / 10 / 30 / or 60 second intervals.
    1. Press the SHUTTER button to toggle between choices.
    2. Press the POWER/MODE button to save whichever setting is showing on the screen
    and continue to the next feature option.

    CHOOSING LED BLINKING ON / OFF

    You can set the red LED light to blink while fi lming or to be o at all times, for stealth:
    Symbol on LCD Screen Function
    (default setting)
    LED blinking ON.
    LED blinking OFF.
    1. Press the SHUTTER button to toggle between choices.
    2. Press the POWER/MODE button to save whichever setting is showing on the screen and continue to the
    next feature option.
    Photo Mode Resolution Indicator
    Triple Shot Photo
    Mode
    Delete Last/All Format
    SD Card
    Video Mode Battery Meter
    10 Second Timer
    Mode
    Spot Meter Exposure
    ON
    Number of Files
    on SD Card
    SD Card Not Inserted
    H E R O 1 0 80 INSTRUCTIONS
GoPro HD HERO

Kell segítség?

Kérdések száma: 0

Van kérdése a (z) GoPro HD HERO kapcsán, vagy segítségre van szüksége? Tegye fel a kérdését itt. Adjon világos és átfogó leírást a problémáról és a kérdéséről. Minél részletesebben ábrázolja a problémát és a kérdést, annál könnyebben tudnak más GoPro HD HERO tulajdonosok megfelelő választ adni a kérdésére.

Itt ingyenesen megtekintheti a (z) GoPro HD HERO kézikönyvét. Ez a kézikönyv a Zsebkamerák kategóriába tartozik, és 1 ember értékelte, átlagosan 7.5. Ez a kézikönyv a következő nyelveken érhető el: Angol. Van kérdése a (z) GoPro HD HERO kapcsán, vagy segítségre van szüksége? Itt tedd fel kérdéseidet

GoPro HD HERO specifikációk

Általános
Márka GoPro
Modell HD HERO
Termék Zsebkamera
EAN 818279010015
Nyelv Angol
Fájltípus PDF